S-D025
Product Number

Post-Side Mounted Collector/Local Road Cut-Off
Outdoor Luminaire "Deca Sheild"

APPLICATIONS

* Ideal for local roads, collector roads, parking areas, entranceways, driveways, open areas & others alike application

SPECIFICATION FEATURES

Design:

* Body, glass-frame and cover-control gear are made of stamped, welded Galvanized steel sheet. Extension mounting arm attachment is made of heavy duty steel pipe welded on the steel mounting plate. All are pretreated, painted and stove enameled in gray color.

* Other color finishes upon request.

* Glass-frame and cover-control gear are hinged and locked by means of fastener twitst locks to the body.

Sealed by means of felt gasket, protection against dust and water entry.

Mounting:

* Post-side mounted.

Projected Wind Area:

* 0.12-meter square.

Cable Entry:

* Supplied w/ 3x6.0-mm² term. block for cable supply.

Lamps:

* 1 - 250W max., Mercury Vapor "MV" ellip. lamp.

* 2 - 250W max., Metal Halide "MH" ellip. lamp.

* 3 - 250W max., Metal Halide "MH" tubular lamp.

* 4 - 250W max., High Pres. Sod. "HPS" ellip. lamp

* 5 - 250W max., High Pres. Sod. "HPS" tub. lamp.

* Other lamp sources upon request.

Voltage and Frequency:

* 120, 220 or 277 VAC, 60Hz.

* 220 or 240 VAC, 50Hz.

* Other Voltage/Frequency upon request.

Control Gear:

* High Power Factor.

Light Controllers:

* GL -Clear plain pattern tempered flat glass diff.

* SA -Symmetrical hydroformed specular finish aluminum reflector.-

S-D025

Product Number

IP-54

Protection Rating

Section

Tabulation & Ordering Number Logic
	Ordering example: S-D025/5-250BP.GL.SA, Post-side mounted collector/local road outdoor luminaire "Decasheild", 1x250-watts High pressure sodium lamp, BP -220V/ 60hz Reactor type High power factor control gear, GL -Clear plain pattern tempered flat glass diffuser & SA -Sym-metrical hydroformed specular finish aluminum reflector.
	Product Number	Light Source, (HID Lamps)			Volt./ Freq. & Blst. Type	Light Controller	Other Option	Dimensions - (mm)						Wt.
	Product Number	No.	Code	Watt.	Volt./ Freq. & Blst. Type	Light Controller	Other Option	A	B	C	D	E	F	kg. (appr.)
	xxxxxx/	-	x-	xx.	x & x.	xx.	xx.	A	B	C	D	E	F	kg. (appr.)
		1	1	80	A-120V/60Hz	GL-Clr. plain	FU-Fused Ter-	590	360	200	200	87	106	12.50
				100	B-220V/60Hz	pattern tem-	minal Block	590	360	200	200	87	106	12.00
				125	C-277V/60Hz	pered flat	PH -Photo Cell	590	360	200	200	87	106	12.50
				175	P-240V/50Hz	glass diff.		590	360	200	200	87	106	13.50
				250	S-*220V/50Hz		Etc...	590	360	200	200	87	106	14.00
	S-D025		2	70		SA -Symm.		590	360	200	200	87	106	12.50
				100	N-Auto-reg.	hydroformed		590	360	200	200	87	106	13.00
				150	P-Reactor	specular fi-		590	360	200	200	87	106	13.80
				175		nish alumi-		590	360	200	200	87	106	14.00
			2 or 3	250		num refl.		590	360	200	200	87	106	14.50
			4 or 5	70				590	360	200	200	87	106	12.50
				100				590	360	200	200	87	106	13.00
Dimensional drawing				150				590	360	200	200	87	106	13.80
Dimensional drawing				250				590	360	200	200	87	106	14.50

Photometric Data

Luminaire:

Post-Side Mounted Road/Street Luminaire

Power :

250 watts

Type........:

S-D025/5-250 ...GL.SA

L x W x H:

295.0. x295.0.. 0

Lamp.......:

L 250W High Pressure Sodium Tubular Lamp

Output ratio :

81.30 %

Intensity Distn. in cd/1000lm "Polar Curve"

Zonal Flux Distribution - 'Graph & Data"

Ordering Accessories Information
Number	Descriptions	Number	Descriptions
MLTA-900102BZDM	Mounting Arm Attachment Angle =90°, 73-mm Ø Pipe x 102-mm Arm Length, Bronze dark-matt finish.	MLTB-900102BZDM	Mounting Arm Attachment Angle =10°, 73-mm Ø Pipe x 102-mm Arm Length, Bronze dark-matt finish.
MLTA-900102GV	Mounting Arm Attachment Angle =90°, 73-mm Ø Pipe x 102-mm Arm Length, Galvanized finish	MLTB-900102GV	Mounting Arm Attachment Angle =10°, 73-mm Ø Pipe x
MLTA-900102GYMM	Mounting Arm Attachment Angle =90°, 73-mm Ø Pipe x 102-mm Arm Length, Gray medium-matt finish	MLTB-900102GRMM	Mounting Arm Attachment Angle =10°, 73-mm Ø Pipe x 102-mm Arm Length, Gray medium-matt finish.

Note: For more detailed information, refer Accessories Section.

Mounting System

Post-Side Mounting

For more product information contact factory

Year - 2002/2003

* Other color finishes upon request.

Sealed by means of felt gasket, protection against dust and water entry.

* Post-side mounted.

* 0.12-meter square.

* 1 - 250W max., Mercury Vapor "MV" ellip. lamp.

* 2 - 250W max., Metal Halide "MH" ellip. lamp.

* 3 - 250W max., Metal Halide "MH" tubular lamp.

* 4 - 250W max., High Pres. Sod. "HPS" ellip. lamp

* 5 - 250W max., High Pres. Sod. "HPS" tub. lamp.

* Other lamp sources upon request.

* GL -Clear plain pattern tempered flat glass diff.

* SA -Symmetrical hydroformed specular finish aluminum reflector.-

Mounting Arm Attachment Angle =90°, 73-mm Ø Pipe x 102-mm Arm Length, Bronze dark-matt finish.

Mounting Arm Attachment Angle =10°, 73-mm Ø Pipe x 102-mm Arm Length, Bronze dark-matt finish.

Mounting Arm Attachment Angle =90°, 73-mm Ø Pipe x 102-mm Arm Length, Galvanized finish

Mounting Arm Attachment Angle =10°, 73-mm Ø Pipe x

Mounting Arm Attachment Angle =90°, 73-mm Ø Pipe x 102-mm Arm Length, Gray medium-matt finish

Mounting Arm Attachment Angle =10°, 73-mm Ø Pipe x 102-mm Arm Length, Gray medium-matt finish.