7419
Product Number

Post-Top, Post-Side or Wall-Side Mounted
Cut-Off or Semi Cut-Off Local Road Outdoor
Luminaire - (Licensed by General Electric)

APPLICATIONS

* Ideal for commercial, local & altery roads, perimeters, parks, open places & others alike application.

SPECIFICATION FEATURES

Design:

* Body is made of die cast aluminum, pre-teated, pain-

ted and stove enameled in gray color.* Other color finishes upon request.

* Optical compartment is charcoal filtered.

* Supplied gasket to sealed body and glass diffuser & locked by means of stainless toggle, protection against dust & water entry.

Mounting:

* 7419PS -Post-side mounted.

* 7419PT -Post-top mounted.

* 7419WS -Wall-side mounted.

Projected Wind Area:

* 0.07-meter square.

Cable Entry:

* Supplied with 3 x 6.0-mm² terminal block for cable supply.

Lamps:

* 1 -175W max., Mercury Vapor "MV" elliptical lamp.

* 4 -150W max., High Pressure Sodium "HPS" elliptical lamp.

* 5 -150W max., High Pressure Sodium "HPS" tubular lamp.

* Other lamp sources upon request.

Voltage and Frequency:

* 127 or 220 VAC, 60Hz.

* 220 or 240 VAC, 50Hz.

* Other Voltage/Frequency upon request.

Control Gear:

* High Power Factor or Normal Power Factor.

Light Controllers:

* GC -Clear plain pattern ellipsoidal molded glass diffuser.

* GP -Clear prismatic refractive pattern molded glass diffuser.

* SA -Symmetrical hydroformed Alzak finish aluminum one-piece reflector.

7419

Product Number

IP-65

Protection Rating

Section

Tabulation & Ordering Number Logic
	Ordering example: 7419PT/4-150BP.GC.SA.FU, Post-top mounted cut-off commercial/local road outdoor luminaire, 1x80-watts High pressure sodium lamp, BP -220V/ 60hz Reactor type High power factor control gear, CL -Clear plain vacuum molded polycarbonate bowl diffuser, SA -Sym- metrical hydroformed specular finish one-piece reflector and FU ?Fused terminal block.
	Product Number	Light Source, (HID Lamps)			Volt./ Freq. & Blst. Type	Light Controller	Other Option	Dimensions - (mm)				Weight
		No.	Code	Watt.				A	B	C	D	kg. (approx.)
	xxxxxx/	-	x-	xx.	x & x.	x. or xx.	xx.
		1	1	80	X-127V/60Hz	GC-Clr. plain	FU-Fused Ter-	565	193	222	170	10.00
					B-220V/60Hz	ellipsodal	minal Block
				100	P-240V/50Hz	molded	PH -Photo Cell	565	193	222	170	11.00
	7419PS				S-220V/50Hz	glass diff.
				125		GP-Clr. pris-	Etc.	565	193	222	170	10.00
					N-Auto-reg.	matic refrac-
	7419PT			175	P-Reactor	tive pattern		565	193	222	170	13.00
						molded
	7419WS		4 or 5	70		glass diff.		565	193	222	170	10.50
						SA-Symm.
				100		hydroformed		565	193	222	170	11.50
						Alzak finish
Dimensional drawing				150		alum. 1-pc.		565	193	222	170	13.50
						reflector

Photometric Data

Luminaire:

Post-Top Mounted Road/Street Luminaire

Power :

150 watts

Type........:

7419PT/4-150 ...GC.SA

L x W x H:

250.0 x 160.0 x 80.0

Lamp.......:

L 150W High Pressure Sodium Lamp

Output ratio :

77.90 %

Intensity Distn. in cd/1000lm "Polar Curve"

Zonal Flux Distribution - 'Graph & Data"

Ordering Accessories Information
Number	Descriptions	Number	Descriptions
MWB-100496BZDM	Wall Mounting Arm-pipe, Angle =10°, 63-mm Ø pipe x 496-mm Arm Length, Bronze Dark-Matt finish.	MWB-100496GYLG	Wall Mounting Arm-pipe, Angle =10°, 63-mm Ø pipe x 496-mm Arm Length, Gray Light-Gloss finish.
MWB-100496GV	Wall Mounting Arm-pipe, Angle =10°, 63-mm Ø pipe x 496-mm Arm Length, Galvanized finish	MWB-100496WHLG	Wall Mounting Arm=pipe, Angle =10°, 63-mm Ø Pipe x 496-mm Arm Length, White Light-Gloss finish.

Note: For more detailed information, refer Accessories Section.

Mounting System

Post-Side Mounting	Post-Top Mounting	Wall-Side Mounting

For more product information contact factory

Year - 2002/2003