7297D
Product Number

Pendant or Surface-Bracketed Mounted Dust and
Watertight and Corrosion Proof Indoor or Outdoor
(Under Shade) Industrial Luminaire w/ Molded Diffuser

APPLICATIONS

* Ideal for industrial premises, high pressure washing areas i.e. chemical industry, paper mills, mines, breweries, abattoirs and others alike application that requires high degree of protection & ex environments subjected to oils or ammonia vapors.

SPECIFICATION FEATURES

Design:

* Body is made of self-intinguishing molded glass reinforce polyester (GRP) in gray color with gear tray is made of die formed Galvanized steel sheet, hinged and removable for easy maintenance.-

* Diffuser is held to the body by means of heavy-duty stainless steel toggles & supplied with EPDM gasket.

Mounting:

* 7297DP -Pendant mounted suspended by wires, rods or chains, to be specified on order, refer Mounting Accessories Section).

* 7297DS -Surface-bracketed mounted, supplied with mounting bracket.

Cable Entry:

* 22.5-mm Ų with membrance grommets of EPDM material one each ends of the housing.

Lamps:

* 36 & 58W, T8-Fluo. for Switch Start "SS" or High Frequency "HF" Ballast.

* 40 & 65W, T12-Fluo. for Sw. "SS" or Rapid Start "RS" Ballast.

* Other lamp sources upon request.

Voltage and Frequency:

* 120, 127, 220 or 277 VAC, 60Hz.

* 220 or 240 VAC, 50Hz

* Other Voltage/Frequency upon request.

Control Gear:

* High Power Factor.

Light Controllers:

* CK -Opalised plain pattern acrylic KEMSEG molded diffuser.

* CL -Clear plain pattern acrylic molded diffuser.

* PC -Opalised polycarbonate molded diffuser.

* SA -Symmetrical specular aluminum reflector, (option, upon request).

7297D

Product Number

IP-65

Protection Rating

Section

Tabulation & Ordering Number Logic
	Ordering example: 7297DS/240BA.CK.SA.E3.TW, Surface mounted dust/water-tight and corrosion proof industrial luminaire, 2x40-watts fluorescent lamp, BA -220V/ 60Hz Rapid start High power factor control gear, CK -Opalised plain pattern acrylic KEMSEG molded diffuser, SA -Symmetrical specular aluminum reflector, E3 -Emergency pack 3.0 hours duration & TW -Through wire.
	Product Number	Light Source, (Fluo.)		Volt./ Freq. & Blst. Type	Light Controller	Other Option	Dimensions - (mm)				Weight
		No.	Watt.				A	B	C	D	kg. (approx.)
	xxxxxx/	x	xx	x & x.	xx. & xx.	x. &/or xx.
		1	36	A-120V/60Hz	CL -Clr. Acr.	E3 -Emer. Pack 3.0	1335	225	126	800	5.40
				B-220V/60Hz	Molded diff.	Hours duration
			40	C-277V/60Hz			1335	225	126	800	6.40
				X-127V/60Hz	CK -Opalised	E -Emer. Pack. 1.5
			58	P-240V/50Hz	Acr.KEMSEG	Hours duration	1635	225	126	1000	7.30
	7297DP			S-220V/50Hz	Molded diff.
			65			FU -Fused T./Block	1635	225	126	1000	7.90
				A -RS Ballast	PC -Opalised
		2	36	B -SS Ballast	polycarbonate	RF -Radio Filter	1335	225	126	800	5.50
	7297DS			F -HF Ballast	Molded diff.
			40			TR -Temperature	1335	225	126	800	6.50
					SA-Symm. Al.	Resistant Wire
			58		specular refl.		1635	225	126	1000	7.40
						TW -Through Wire
Dimensional drawing			65				1635	225	126	1000	8.00
						Etc...

Photometric Data

Luminaire:

Surface Mtd. w/ Clear Diff. & Alum. Refl. Ind'l. Lum'r.

Power ........:

72 watts

Type........:

7297DS/236 ...CL.SA

L x W x H ...:

1270 x 200 x 60

Lamp.......:

L 36/21

Output ratio :

70.68 %

Intensity Distribution in cd/1000lm

Utilization Factors

Ordering Accessories Information
Number	Descriptions	Number	Descriptions
CMB-0003GYMM	Ceiling Mtg. Bracket in grat medium matt , (2 sets/lumr)	SRS-1301000	Susp. Rod-Single, 13.0 Ų x 1000-mm H, (2 sets/lumr)
SRS-1300300	Susp. Rod-Single, 13.0 Ų x 300-mm H, (2 sets/lumr)	SRS-1301500	Susp. Rod-Single, 13.0 Ų x 1500-mm H, (2 sets/lumr)
SRS-1300600	Susp. Rod-Single, 13.0 Ų x 600-mm H, (2 sets/lumr)

Note: other sizes available on request. For more detailed information refer Accessories Section.

Mounting System

Pendant Mounting	Surface-Bracketed Mounting

For more product information contact factory

Year - 2002/2003