7295
 Product Number

 Pendant or Surface Mounted Dust-tight and Water
Jet-proof Indoor or Outdoor (Under Shade)
Industrial Luminaire with Molded Diffuser

APPLICATIONS

* Ideal for rooms (i.e. utility, machine and shower), areas (i.e. laundry,  washing and parking), industrial workshops, slaughter houses and  others that requires high degree of protection against dust & water.
SPECIFICATION FEATURES
Design:

* Molded glass reinforces polyester (GRP) body in gray color, hardly inflammable supplied with non-aging gasket. Inner gear tray is made of die & roll formed Cold Rolled Steel "CRS" sheet, pre-treated, painted, and stove enameled in white color and clipsable type for easy maintenance.-

* Diffuser is held to the body by means of   T1 -plastic toggles or T2 stainless steel toggles, (to be specified on order).
Mounting:
* 7295P Pendant mounted suspended by wires, rods or chains, (to be specified on order, refer Mounting Accessories Section).
* 7295S Surface mounted.
Cable Entry:
* 2 x 22.5-mm Ø chloropene grommets one on each ends of the housing.
Lamps:
* 18, 36 & 58W, T8 Fluo. for Switch Start SS or High Frequency HF Ballast.
* 20, 40 & 65W, T12 Fluo. for Sw. SS or Rapid  Start RS Ballast
* Other lamp sources upon request.
Voltage and Frequency:
* 120, 127, 220 or 277 VAC, 60Hz.
* 220 or 240 VAC, 50Hz.
* Other Voltage/Frequency upon request.
Control Gear: * High Power Factor.
Light  Controllers:
* CL Clear frosted pattern acrylic molded diffuser.
* PC Clear fluttered pattern inside polycarbonate  molded diffuser
* SA Symm. specular aluminum reflector, (option,  upon request).

 

 

7295

Product Number

IP-65

Protection Rating

G

Section

 

Tabulation & Ordering Number Logic

 

Ordering example: 7295S/258BB.PC.E3.T2 Surface mounted industrial luminaire, 2x58 wattsFluorescent lamp, BB -220V/ 60Hz Switch start High power factor control gear, PC -Clear polycarbonate molded diffuser, E3 -Emergency pack 3.0 hours duration & T2 -Stainless steel toggle.

Product

Number

Light Source, (Fluo.)

Volt./ Freq.         &         Blst. Type

 Light Controller

Other Option

Dimensions - (mm)

Weight

No.

Watt.

A

B

C

D

kg.

(approx.)

xxxxx/

x

xx

x & x.

xx. &/or xx.

x. &/or xx.

 

1

18 or 20

A-120V/60Hz

CL-Clear acr-

E3 -Emer. Pack

673

111

104

450

3.50

 

B-220V/60Hz

ylic molded

3.0 Hrs. duration

 

36 or 40

C-277V/60Hz

diffuser

E  -Emer. Pack

1283

111

104

660

4.30

 

X-127V/60Hz

PC-Clear po-

1.5 Hrs. duration

7295P

58 or 65

P-240V/50Hz

lycarbonate

FU -Fused T/Blk.

1583

111

104

900

4.50

 

S-220V/50Hz

molded diff.

RF -Radio Filter  

 

2

18 or 20

 

 

T1 -Plastic Toggle

673

168

108

450

3.80

7295S

A-RS Ballast

Option

T2 -Stainless Stl.

 

36 or 40

B-SS Ballast

SA -Symm.   

Toggle

1283

168

108

660

4.60

 

F-HF Ballast

specular

TR-Temperature

Dimensional drawing

 

58 or 65

 

aluminum

Resistant Wire

1583

168

108

900

7.40

 

 

reflector

Etc...

Note: Luminaire with 20-watts T12-Fluorescent lamp for 220VAC, 60Hz Rapid "RS" Start Ballast not possible.

Photometric Data

Luminaire:

Surface Mtd. with Clear Diffuser Industrial Luminaire

Power ........:

116 watts

Type........:

7295S/258 ....PC

L x W x H ...:

1570 x 140 x 60

Lamp.......:

L 58W/21

Output ratio :

67.97 %

Intensity Distribution in cd/1000lm

 Utilization Factors

Ordering Accessories Information

Number

Descriptions

Number

Descriptions

SRS-1300300

Susp. Rod-Single, 13.0 Ø x   300-mm H, (2 sets/lumr)

SRS-1301000

Susp. Rod-Single, 13.0 Ø x 1000-mm H, (2 sets/lumr)

SRS-1300600

Susp. Rod-Single, 13.0 Ø x  600-mm H, (2 sets/lumr)

SRS-1301500

Susp. Rod-Single, 13.0 Ø x 1500-mm H, (2 sets/lumr)

 

 

 

 

Note: other sizes available on request. For more detailed information refer Accessories Section.

Mounting System

Pendant Mounting

Surface Mounting

For more product information contact factory

Year - 2002/2003