7071
 Product Number

 Multi-Mounting Single or Double Face Sign / Directional
Indoor Luminaire with or without Emergency Back-up
APPLICATIONS

* Ideal for offices, premises, rooms -doorways, passages and others  alike directional application.
SPECIFICATION FEATURES
Design:

* Body & wall mtg. assy. are made of stamped & welded CRS sheet, pre-treated, painted & stove enameled in white color. * Other color finishes upon request--

* Wall mtg. plate assy. is fastened on the wall by means of screws. * Body is fixed by sliding into the wall mtg.  plate assembly. Full outward side & front direction the spring loaded body end piece to fix. * Sign's plate is fixed by sliding into the body. Full side & rear or front direction the spring loaded body end piece to fix.

* 7071F_ -Single face  & 7071D_ -Double face lumr.
Mounting:

* 7071_C -Ceiling mounted for Single & Double face.

* 7071_F -Flag-wall mounted for Single & Double face.

* 7071_P -Pendant mtd. suspended by wires, rods or chains for Single & Double face, (to be specified on order, refer Mounting Accessories Section).

* 7071_W -Wall-direct mounted for Single face only.
Cable Entry:

* 2x19 Ø holes on top of  the housing, 2x12.5 Ø knock-  out holes on the fixed end piece or 19-mm Ø on the wall plate for wall mounting application.
Lamps:

* 8W, T5-Fl. & 18W, T8-Fl. for Switch Start "SS" Blst.

* 20W, T12-Fl. for Switch "SS" & Rapid Start "RS" Blst.

* T5 -Fluo. & Other lamp sources upon request and luminaire housing dimensions subject to changes
Voltage and Frequency:
* 120, 127,  220 or 277 VAC, 60Hz. &  220 or 240 VAC, 50Hz. * Other Voltage/Frequency upon request.
Control Gear:

* Normal Power Factor or High Power Factor. Visible tilt switch & led lamp provided only for w/ emer. back-up.
Light  Controllers:

* TX145GW -Opal diffuser w/ text (EXIT -Arabic/Englih side by side in white text & green background)

* TX060WG -Opal diff. w/ pictogram (MANRUNNING -Left to right direction, ARROW -Center to right direction & DOOR -Right. Green pictograms and white metal plate background).

* Other Signs upon reqt., refer Texts & Pictograms Sect

 

  

7071

Product Number

IP-20

Protection Rating

E

Section

Tabulation & Ordering Number Logic

 

Ordering example: 7071DC/118KB.TX145GW.E3, Clng. mtd. double face sign/direct'l. lumr., 1x18W fluo.lamp, BA -220V/60Hz Rapid start HPF control gear, TX145GW -Opal diff. w/text (EXIT -Arabic/English side by side. White text & green background & E3 ?Maint'd. emer. pack 3.0 hrs.

 

Product

Number

Light Source, (Fluo.)

Volt./ Freq.        &         Blst. Type

      Light   Controller

Other Option

Dimensions - (mm)

Weight

No.

Watt.

A

B

C

D

E

 kg.

(approx.)

xxxxxx/

x

xx

xx.

xxxxxxx.

x. &/or xx.

 

1

08

A-120V/60Hz

TX145GW -

E3-Emer. Pack

414

149

84

180

200

1.50

 

B-220V/60Hz

Exit sign w/

3.0 Hrs. duration

 

C-277V/60Hz

White text   

 

7071FC

18

L-220V/60Hz

and Green

EN3-Non-maintd.

630

210

107

180

400

4.00

7071FF

K-127V/60Hz

background

Emer. Pack 3.0

7071FP

X-127V/60Hz

 

hours duration.

7071FW

20

J-240V/50Hz

TX060WG -

 

630

210

107

180

400

5.20

 

N-220V/50Hz

Manrunn'g+

E-Maint'd. Emer.

 

P-240V/50Hz

Arrow+Door

Pack. 1.5 Hours  

 

2

08

S-220V/50Hz

pictograms

 

414

191

103

180

200

1.70

 

 

 

EN-Non-maint'd.

7071DC

A-RS Ballast

Etc...

Emer. Pack

7071DF

18

B-SS Ballast

 

1.5 Hours.

630

210

107

180

400

4.20

7071DP

 

 

 

 

 

 

Etc...

 

20

 

 

 

630

210

107

180

400

5.40

Dimensional drawing

 

 

 

 

 

 

 

 

Note: K -127V/60Hz,  L -220V/60Hz, J -240V/50Hz  & N -220V/50Hz are Normal Power Factor. 

Ordering Accessories Information

Number

Descriptions

Number

Descriptions

SRD-1300300C

Susp. Rod-Dbl, 13.0 Ø x 300-mm H, for 8 & 18W (1 set/lumr)

WDP-10108WHLG

Wall Direct Mounting plate for 1x8W, (1 sets/lumr.)

SRD-1300600C

Susp. Rod-Dbl, 13.0 Ø x 600-mm H, for 8 & 18W (1 set/lumr)

WDP-10120WHLG

Wall Direct Mounting plate for 1x18W, (1 sets/lumr.)

SRD-1301000C

Susp. Rod-Dbl, 13.0 Ø x1000-mm H, for 8 & 18W (1 set/lumr)

WFM-00108WHLG

Wall Flag Mtg. angle 90° bracket for 8W, (1 set/lumr.)

SRD-1301500C

Susp. Rod-Dbl, 13.0 Ø x1500-mm H, for 8 & 18W (1 set/lumr)

WFM-00120WHLG

Wall Flag Mtg. angle 90° bracket for 20W, (1 set/lumr.)

 

 

 

 

Note: Other accessories design upon request. For more detailed information refer Accessories Section. 

Mounting System

Flag-Wall Mounting              Wall-Direct Mounting

Ceiling Mounting

Pendant Mounting

 

For more product information contact factory

Year - 2002/2003