 |
7042
Product Number |
Pendant
or Recess or Surface Mounted Mini-Square
Indoor
Commercial Luminaire with Diffuser or
Louver
|
|
 |
|
APPLICATIONS |
 |
* Ideal for
offices, premises, rooms and others alike application.
|
|
 |
|
SPECIFICATION FEATURES
|
 |
|
Design:
|
* Body is made of stamped, welded Cold Rolled Steel "CRS" sheet,
pre-treated, painted & stove enameled in white color.
|
*Other
color finishes upon request.
|
|
* Diffusers or louvers are laid-in inside the housing.
|
|
|
Mounting:
|
* 7042P
-Pendant mounted suspended by wires, rods or chains,
|
(to
be specified on order, refer Mounting
Accessories Section).
|
* 7042R
-Recess mounted supplied with recessing
frame. Aperture ceiling opening approximately 15-mm larger than fixture dimensions
A
& B.
|
|
* 7042S
-Surface mounted.
|
|
|
Cable Entry:
|
* 2 x 19-mm Ø holes on top and 16-mm Ø knockout hole one each end
pieces side of the housing.
|
|
|
Lamps:
|
* CS
=9
& 11W
-Compact
-S
Fluorescent and
CL
=24 & 36W
Compact-L
Fluorescent for Switch
Start "SS" or High Frequency "HF" Ballast.
|
*
Other lamp sources upon request & luminaire housing dimensions
subject to changes.
|
|
|
Voltage and Frequency: |
|
* 127 or 220 VAC, 60Hz.
|
|
* 220 or 240 VAC, 50Hz.
|
|
*
Other Voltage/Frequency upon request.
|
|
|
Control Gear: |
*
High Power
Factor.*
High power factor upon request. |
|
Light
Controllers: |
* 0 -Opal
plain acrylic sheet diffuser.
|
* 1
-Opalized
cross-baffled plastic louver.
|
* 2
-Clear
prismatic pattern acrylic sheet diffuser.
|
*
3
-Mettalized
silver finish cross-baffled plastic louver.
|
|
* Other Louvers type upon request.
|
|
|
 |
|
|
7042 |
IP-20 |
A |
|
Product
Number |
Protection Rating |
Section |
|
Tabulation
& Ordering Number Logic |
|
|
 |
Ordering
example:
7042S/2CS11KB.2.SA.FU.RF, Surface
mounted indoor luminaire,
2xCS11-watts
Compact-S
fluorescent lamp,
KB
-127
V/60Hz Switch start Normal power factor control
gear,
2
-Clear
prismatic pattern acrylic sheet diffuser,
SA
-Symmetrical
aluminum reflector,
FU
-Fused
terminal block &
RF
-Radio filter. |
|
Product
Number |
Light
Source, (Compact
Fl.) |
Volt./
Freq.
& Blst.
Type |
Light Controller |
Other
Option |
Dimensions
- (mm) |
Weight |
|
No. |
Watt. |
A |
B |
C |
D |
E |
kg.
(approx.) |
|
xxxxx/ |
x |
xxxx |
xx. |
xx.
&
xx. |
x.
&/or xx. |
|
|
1 |
CS09 |
B-220V/60Hz |
0 -Opal plain |
E3 -Emer. Pack |
226 |
226 |
91 |
175 |
c/l |
1.50 |
|
|
2 |
C-277V/60Hz |
sheet
diff. |
3.0
Hrs. duration |
1.70 |
|
7042P |
1 |
CS11 |
K-127V/60Hz |
1 -Opalized |
E
-Emer. Pack. |
300 |
300 |
91 |
233 |
c/l |
2.50 |
|
|
2 |
L-220V/60Hz |
X-baffled
lvr. |
1.5
Hrs. duration |
2.70 |
|
|
3 |
X-127V/60Hz |
2 -Clr. prism. |
FU -Fused Ter- |
2.90 |
|
7042R |
1 |
CL24 |
P-240V/50Hz |
sheet
diff. |
minal
Block |
400 |
400 |
91 |
300 |
c/l |
4.10 |
|
|
2 |
S-220V/50Hz |
3 -Metallized |
RF -Radio Filter |
4.30 |
|
|
3 |
|
X-baffled
lvr. |
TR-Temperature |
4.50 |
|
7042S |
1 |
CL36 |
B-SS
Ballast |
Option |
Resistant
Wire |
500 |
500 |
91 |
400 |
400 |
6.40 |
|
Dimensional
drawing |
|
2 |
F-HF Ballast |
SA -Sym. Al. |
|
6.60 |
|
|
3 |
|
reflector |
Etc... |
6.80 |
Note:
K
-127V/60Hz
& L -220V/60Hz are Normal Power
Factor.
|
Photometric
Data |
 |
Luminaire: |
Surface
Mounted Commercial Luminaire |
Power
........: |
22
watts |
|
Type........: |
7042S/2CS11
...2 |
L
x W x H ...: |
280
x 280 x 0 |
|
Lamp.......: |
L
DULUX S 11W/21 |
Output
ratio : |
59.39
% |
 |
|
Intensity
Distribution in cd/1000lm |
Utilization
Factors |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ordering
Accessories Information. |
|
Number |
Descriptions |
Number |
Descriptions |
|
SBS-0450300 |
Susp.
Ball-chain -Single, 4.5 Ø
x 300-mm H, (2 sets/lumr) |
SRS-1301000 |
Susp.
Rod -Single, 13.0 Ø
x 1000-mm H, (1 set/lumr) |
|
SBS-0450600 |
Susp.
Ball-chain -Sgl., 4.5 Ø
x 600-mm H, (2 sets/lumr) |
SRS-1301500 |
Susp.
Rod -Single, 13.0 Ø
x 1500-mm H, (1 set/lumr) |
|
SBS-0451000 |
Susp.
Ball-chain -Single, 4.5 Ø
x 1000-mm H, (2 sets/lumr) |
SRD-1300300C |
Susp.
Rod-Dbl, 13 Ø
x 300-mm H, for 8 & 18W (1 set/lumr) |
|
SBS-0451500 |
Susp.
Ball-chain -Sgl., 4.5 Ø
x 1500-mm H, (2 sets/lumr) |
SRD-1300600C |
Susp.
Rod-Dbl, 13 Ø
x 600-mm H, for 8 & 18W (1 set/lumr)
|
|
SCS-0200300 |
Susp.
Chain -Single, 2.0 Ø
x 300-mm H, (2 sets/lumr) |
SRD-1301000C |
Susp.
Rod-Dbl, 13 Ø
x1000-mm H, for 8 & 18W (1 set/lumr) |
|
SCS-0200600 |
Susp.
Chain -Single, 2.0 Ø
x 600-mm H, (2 sets/lumr) |
SRD-1301500C |
Susp.
Rod-Dbl, 13 Ø
x1500-mm H, for 8 & 18W (1 set/lumr) |
|
SCS-0201000 |
Susp.
Chain -Single, 2.0 Ø
x 1000-mm H, (2 sets/lumr) |
SWS-0100300 |
Susp.
Wire-Single, 1.0 Ø
x 300-mm H, (2 sets/lumr) |
|
SCS-0201500 |
Susp.
Chain -Single, 2.0 Ø
x 1500-mm H, (2 sets/lumr) |
SWS-0100600 |
Susp.
Wire-Single, 1.0 Ø
x 600-mm H, (2 sets/lumr) |
|
SRS-1300300 |
Susp.
Rod-Single, 13.0 Ø
x 300-mm H, (1 set/lumr) |
SWS-0101000 |
Susp.
Wire-Single, 1.0 Ø
x 1000-mm H, (2 sets/lumr) |
|
SRS-1300600 |
Susp.
Rod-Single, 13.0 Ø
x 600-mm H, (1 set/lumr) |
SWS-0101500 |
Susp.
Wire-Single, 1.0 Ø
x 1500-mm H, (2
sets/lumr) |
Note:
other sizes available on request. For more detailed information refer
Accessories Section.
|
Mounting
System |
 |
 |
 |
|
Pendant
Mounting |
Recess
Mounting |
Surface
Mounting |
For
more product information contact
factory
Year - 2002/2003 |