 |
5033
Product Number |
Pendant or Recess or Surface
Mounted
Commercial
Indoor Luminaire with Louver
|
|
 |
|
APPLICATIONS |
 |
* Ideal for offices, premises, rooms, corridors, counters and othersalike
application.
|
|
 |
|
SPECIFICATION FEATURES
|
 |
|
Design:
|
* Body is made of stamped, welded Cold Rolled Steel "CRS" sheet, pre-treated, painted & stove enameled in white color.
* Other color finishes
upon request.
|
|
|
Mounting:
|
* 5033P
Pendant mounted suspended by wires, rods
or chains,
(to be specified on order,
refer
Mounting Accessories Section).
|
* 5033R
Recess mtd. supplied with recessing frame.
Aperture ceiling opening approximately
15-mm larger than fixture dimensions
A
&
B.
|
* 5033S
Surface mounted.
|
|
|
Cable
Entry:
|
*
2 x 19-mm Ø holes on top & 16-mm Ø knockout holes one each end piece sides of the housing
|
|
|
Lamps:
|
*
18, 36 & 58W,
T8.Fluo
for Switch Start SS or High
Frequency HF Ballast.
|
*
20, 40 & 65W,
T12.Fluo
for Switch SS or Rapid Start RS
Ballast
|
*
T5
Fluo. and Other lamp sources upon request & luminaire housing dimensions subject to changes.
|
|
|
Voltage and Frequency: |
*
120, 127, 220 or 277 VAC, 60Hz.
|
*
220 or 240 VAC, 50Hz.
|
*
Other Voltage/Frequency upon request.
|
|
|
Control Gear: |
*
High
Power Factor. |
|
Light
Controllers: |
*
45
-V-shaped
metal louver, reflector held by strip
plain cross-baffle both painted white color.
|
*
54 -V-shaped
aluminum louver, specular reflector held by matt strip profiled
cross-baffle.
|
*
55 -Parabolic
shaped aluminum louver, specular re-
flector
held by matt strip profiled cross-baffle.
|
|
|
 |
|
|
5033 |
IP-20 |
A |
|
Product
Number |
Protection
Rating |
Section |
|
Tabulation
& Ordering Number Logic |
|
 |
Ordering
example:
5033R/236BB.54.E3,
Recess
mtd. luminaire, 2x36 watts Fluorescent lamp, BB -220V/60Hz switch start
high
power factor control gear, 54
V-shaped louver & E3
-Emer. pack 3.0 hours
duration. |
|
Product
Number |
Light
Source, (Fluo.) |
Volt./
Freq.
&
Blst.
Type |
Light Controller |
Other
Option |
Dimensions
- (mm) |
Weight |
|
No. |
Watt. |
A |
B |
C |
D |
E |
kg.
(approx.) |
|
xxxxx/ |
x |
xx |
x
&
x. |
xx. |
x.
and/or xx. |
|
|
1 |
18
or 20 |
A-120V/60Hz |
45 -Louver |
E3 -Emer. Pack |
621 |
205 |
99 |
400 |
c/l |
2.20 |
|
|
2 |
B-220V/60Hz |
54 -Louver |
3.0
Hrs. duration |
621 |
335 |
99 |
400 |
c/l |
3.50 |
|
5033P |
3 |
C-277V/60Hz |
55 -Louver |
E
-Emer. Pack. |
621 |
485 |
99 |
400 |
148 |
4.20 |
|
|
4 |
X-127V/60Hz |
|
1.5
Hrs. duration |
621 |
625 |
99 |
400 |
292 |
5.20 |
|
|
1 |
36
or
40 |
P-240V/50Hz |
|
FU -Fused Term. |
1242 |
205 |
99 |
800 |
c/l |
4.30 |
|
5033R |
2 |
S-220V/50Hz |
|
Block |
1242 |
335 |
99 |
800 |
c/l |
6.90 |
|
|
3 |
|
|
TR -Temperature |
1242 |
485 |
99 |
800 |
148 |
8.00 |
|
|
4 |
A-RS Ballast |
|
Resistant
Wire |
1242 |
625 |
99 |
800 |
292 |
9.90 |
|
Dimensional
drawing |
5033S |
1 |
58
or 65 |
B-SS
Ballast |
|
TW-Through Wire |
1542 |
205 |
99 |
1000 |
c/l |
4.90 |
|
|
2 |
F-HF Ballast |
|
Etc. |
1542 |
335 |
99 |
1000 |
c/l |
7.30 |
|
Photometric Data |
 |
Luminaire: |
Recess Mounted
Commercial Luminaire |
Power
........: |
72 watts |
|
Type........: |
5033R/236 ...54 |
L x W x
H ...: |
1215 x 295 x 0 |
|
Lamp.......: |
L 36/10 |
Output
ratio : |
46.55 % |
 |
|
Intensity Distribution in cd/1000lm |
Utilization Factors |
|
Ordering
Accessories Information |
|
Number |
Descriptions |
Number |
Descriptions |
|
SBS-0450600 |
Susp.
Ball-chain -Single, 4.5 Ø
x 600-mm H, (2 sets/lumr) |
SRD-1300600A |
Susp.
Rod-Double, 13.0 Ø
x 600-mm H, for 20 (18) W(1
set/lumr) |
|
SBS-0451000 |
Susp.
Ball-chain -Sgl., 4.5 Ø
x 1000-mm H, (2 sets/lumr) |
SRD-1301000A |
Susp.
Rod-Double, 13.0 Ø
x 1000-mm H, for 20 (18) W(1
set/lumr) |
|
SBD-0450600A |
Susp.
Ball-chain -Dbl., 4.5 Ø
x 600-mm H, (2 sets/lumr) |
SRD-1300300B |
Susp.
Rod-Double, 13.0 Ø
x 300-mm H, for 40 (36) W |
|
SBD-0451000A |
Susp.
Ball-chain -Dbl., 4.5 Ø
x1000-mm H, (2 sets/lumr) |
|
&
65 (58) W, (1 set/lumr) |
|
SCS-0200600 |
Susp.
Chain -Single, 2.0 Ø
x 600-mm H, (2 sets/lumr) |
SRD-1300600B |
Susp.
Rod-Double, 13.0 Ø
x 600-mm H, for 40 (36) W |
|
SCS-0201000 |
Susp.
Chain -Single, 2.0 Ø
x 1000-mm H, (2 sets/lumr) |
|
&
65 (58) W, (1 set/lumr) |
|
SCD-0200600A
|
Susp.
Chain -Double, 2.0 Ø
x 600-mm H, (2 sets/lumr) |
SRD-1301000B |
Susp.
Rod-Double, 13.0 Ø
x 1000-mm H, for 40 (36) W |
|
SCD-0201000A |
Susp.
Chain -Double, 2.0 Ø
x 1000-mm H, (2 sets/lumr) |
|
&
65 (58) W, (1 set/lumr) |
|
SRS-1300300 |
Susp.
Rod-Single, 13.0 Ø
x 300-mm H, (2 sets/lumr) |
SWS-0100600 |
Susp.
Wire-Single, 1.0 Ø
x 600-mm H, (2 sets/lumr) |
|
SRS-1300600 |
Susp.
Rod-Single, 13.0 Ø
x 600-mm H, (2 sets/lumr) |
SWS-0101000 |
Susp.
Wire-Single, 1.0 Ø
x 1000-mm H, (2 sets/lumr) |
|
SRS-1301000 |
Susp.
Rod -Single, 13.0 Ø
x 1000-mm H, (2 sets/lumr) |
SWD-0100600A |
Susp.
Wire-Double, 1.0 Ø
x 600-mm H, (2 sets/lumr) |
|
SRD-1300300A |
Susp.
Rod-Double,13.0 Ø
x 300-mm H, for 20 (18) W (1
set/lumr) |
SWD-0101000A |
Susp.
Wire-Double, 1.0 Ø
x 1000-mm H, (2 sets/lumr) |
|
|
|
|
|
Note:
other sizes available on request. For more detailed information refer
Accessories Section.
|
Mounting
System |
 |
 |
 |
|
|
|
|
|
Pendant
Mounting |
Recess
Mounting |
Surface
Mounting |
For
more product information contact factory
Year - 2002/2003
|